P/N:FAGPSGlonass.254,GPS Glonass Dielectric Antenna,Gnss patch antenna with pin 25x25x4mm

P/N:FAGPSGlonass.254,GPS Glonass Dielectric Antenna,Gnss patch antenna with pin 25x25x4mm

Product Detail

Model: FAGPSGlonass.254
(i)Dielectric Antenna
Frequency(MHz ):1575/1602
Center Frequency(MHz ):1590
VSWR:1.5:1
Bandwidth(MHz ):15  Min
Impedance(Ω):50
Peak Gain >4dBi Based on 7cm×7cm ground plane
Gain Coverage >-4dBi at –90°<0 <+90°(over 75% Volume)
Polarization:RHCP
Power Handling(W ):1
(ii)Mechanical
Weight(gram )<10
Size(mm ):25×25×4  
(iii)Environmental
Working Temp:-40℃~+85℃
Storage Temp:-45℃~+90℃
Vibration:Sine sweep 1g(0-p)10~50~10Hz each axis
Humidity:Humidity95%~100%RH

Super durability and pressure resistant. High Gain Ceramic GPS/glonass Antenna with High quality and great connectivity.
Built-in Active Antenna with great connectivity.
Easy to install, High-gain antenna for GPS/glonass
This antenna is great for timing, marine navigation.
The GPS GLONASS 254 is a high performance, single-band passive GNSS L1 antenna that has been carefully designed to provide fantastic positional accuracy on the full GNSS L1 spectrum. It has a dual feed, passive patch design which makes it ideal for next-generation GNSS devices that require excellent positional accuracy in a small form factor. The patch antenna, by means of a double resonance design, has a wide-band operation over GNSS systems including GPS (L1), GLONASS (G1), Galileo (E1) and BeiDou(B1). The 25 mm patch uses a dual-feed configuration to obtain an optimal axial ratio. The GPS GLONASS 254.A is manufactured and tested in a TS16949 first tier automotive approved facility.

  • Write your message here and send it to us